Maintenance; Recommended Maintenance Schedule - Toro 03422 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 10 hours
After first 50 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 1000 hours or 2
years, whichever occurs
first
Important Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
Change the engine oil.
Check the engine belt tension.
Change the engine oil filter.
Check the traction belt tension.
Replace the hydraulic filter.
Torque the wheel lug nuts.
Check the engine RPM (idle and full throttle).
Inspect the air filter, dust cup, and burp valve.
Lubricate all grease fittings.
Change the engine oil.
Check the engine belt tension.
Change the engine oil filter.
Check the traction belt tension.
Service the air filter.
Replace the fuel filter/water separator.
Replace the hydraulic filter.
Torque the wheel lug nuts.
Replace the hydraulic fluid.
Check the battery level and connections.
Inspect the traction linkage movement.
Check the engine RPM (idle and full throttle).
Replace moving hoses.
Replace the safety switches.
Flush the cooling system and replace the hoses.
Replace the thermostat.
Drain and flush the fuel tank.
Drain and flush the hydraulic tank.
31