Controls & Connectors; Front Panel - Onkyo DX-C390 Instruction Manual

Controls & Connectors

Front Panel

North American Model
Other Models
For detailed information, refer to the pages in parenthe-
sis.
STANDBY/ON button (14)
This button is used to set the DX-C390 to On or
Standby. For models with a POWER switch, this
button has no effect unless that POWER switch is
set to ON.
STANDBY indicator (14)
This indicator lights up when the DX-C390 is in
Standby mode.
POWER switch (not North American model)
(14)
This is the main power switch. When set to OFF, the
DX-C390 is completely shutdown.
REPEAT button (21)
This button is used with the Repeat function.
8
Display
Disc tray light Disc tray
RANDOM button (21)
This button is used with the Random function.
DIMMER button (15)
This button is used to adjust the display brightness.
DISPLAY button (19)
This button is used to display elapsed, remaining,
and total time information about the current disc or
track and various information about MP3 tracks.
Remote control sensor (11)
This sensor receives control signals from the remote
controller.
[
] button (14)
This button is used to open and close the disc tray.
DISC SELECT buttons (15)
These buttons are used to select discs. Playback
starts automatically when a disc is selected with one
of these buttons.
PLAY/PAUSE [ ]/[ ] button (15, 16)
This button is used to start and pause playback.
STOP [ ] button (16)
This button is used to stop playback.
[
These buttons are used to select the previous and
next tracks and to navigate folders on MP3 discs.
[
These buttons are used for fast reverse and fast for-
ward and to navigate folders on MP3 discs.
DISC SKIP button (14, 15)
This button is used to turn the disc tray when load-
ing or removing discs and to select discs for play-
back.
[ ] [ ]
]/[ ] & FOLDER /
[ ] [ ]
]/[ ] & FOLDER /
buttons (16, 17)
buttons (16, 17)