Connections - Onkyo DX-C390 Instruction Manual

Connecting the DX-C390

Connections

With (Remote Interactive) you can control the
DX-C390 together with your other
Onkyo AV components. With some Onkyo AV receivers
you can use one remote controller to control all your
Onkyo components and use the following special
functions:
■ Auto Power On
If your DX-C390 is connected to an
Onkyo AV receiver, when you turn on the DX-C390, the
AV receiver will turn on and select the DX-C390 as the
input source.
■ Direct Change
If your DX-C390 is connected to an
Onkyo AV receiver, when you start playback on the
DX-C390, the AV receiver will select the DX-C390 as
the input source.
■ Auto Power Off
When you set an -compatible Onkyo AV receiver to
Standby, all other AV components connected via
enter Standby as well.
■ Dimmer
When you dim the display brightness on an
ible Onkyo AV component, the displays on all other AV
components connected via
To use you must make an analog audio connection (RCA/phono)
between the DX-C390 and your other Onkyo equipment even if they are
connected digitally.
RCA/phono audio connecting cable
-compatible
-compatible
-compatible
-compat-
are dimmed as well.
cable
Coaxial cable (not supplied)
L R
Coaxial IN
CD
Hi-fi amp, AV receiver
To use the functions, you need to connect one of the
DX-C390's connectors to an
another AV component in your system by using the sup-
plied cable.
See the manuals supplied with your other
ble AV components for more information.
Notes:
• Use only cables for
• To use you must make an analog RCA/phono
connection between your DX-C390 and Onkyo AV
receiver even if they are connected digitally.
• The DX-C390 has two
nect either one to your Onkyo AV receiver. The other
connector is for connecting additional
components.
• Connect the DX-C390's
AV components. Connecting to other manufacturer's
AV components may cause them to malfunction.
• Some Onkyo -compatible AV components may
not support the special functions described here.
connector on
-compati-
connections.
connectors. You can con-
-compatible
connector to only Onkyo
Disconnect the power
cord before making any
connections!
13