Prune Stations-Dab - Sangean DDR-36 Operating Instruction

Prune stations - DAB
Over time, some DAB services may stop broadcasting, or may change location and then not be
able to receive a station. In order to remove such stations from the DAB station list, the Prune
stations function will delete the DAB stations from your station list that can no longer be received.
Stations which cannot be found or which have not been received for a very long time are shown
in the station list with a question mark.
. Press the Standby button to switch on your radio.
. Press and release the Mode button until the DAB mode is selected.
. Press and release the Menu button until the Advanced DAB menu shows on the display.
4. Rotate the Tuning control until 'Prune' appears on the display. Press and release the Select
button.
5. Press the Tuning Up or Down buttons to highlight 'Yes'. Press and release the Select button to
cause the stations list to be pruned, eliminating unavailable stations.
6. If you do not wish to prune stations highlight 'No' in step 5 and then press and release the
Select button. The display will revert back to the previous display.
Note:
If you have moved to a different part of the country you should also carry out a search for new
stations (please see the section 'Finding new stations' in previous section).

DAB
<Prune
Prune?
No <Yes>
Prune?
<No> Yes
>