Rear brake, tail, turn signal, reverse
and fog lamps
1.The rear lamp assembly can be accessed
directly through the rear load compartment.
2. Twist and
remove the bulb housing(s)
required and remove the defective bu|b(s).
3. Insert a new
bulb
and replace the
housing(s).
Number plate lamps
1. Remove two screws with a suitable
screwdriver.
2. Remove lens.
as
3. Renew
bulb
and install lens.
Interior lamp
1. Unclip lens assembly using a flat blade.
2. Renew bulb.
3. Reinstall lens assembly.
Instrument illumination
Have bulbs replaced by an Authorised Opel
Dealer.
67