Turn Signal - Opel Speedster Operation, Safety, Maintenance Manual

Bulb replacement
Before replacing a bulb, turn off the
respective light switch.
Only hold new bulb at base! Oil and grease
stains on the glass evaporate, eventually
resulting in a dull reector. inadvertently
stained bulbs may be cleaned with a clean
nonfluffy cloth, using alcohol or white spirit.
Replacement bulb must be in accordance
with data on base of defective bulb.
exceed wattage given on bulb base.
Headlamp aiming
Caution! Headlamp aiming should
out by an Authorised Opel Dealer.
66
Do not
be carried
_
Headlamp dipped and mam beam,
parking and front
amps
1. The rear of the headlamp assembly is
accessed through the front compartment.
2. Remove the nut on the rear of the
headlamp assembly and slide out.
3. Remove the headlamp multiplug and
remove the rear cover of the headlamp
assembly.
4. Twist and remove the
_

turn signal

indicator required
5. Insert
housing(s).
6. Replace the rear cover of the head lamp
assembly
7. Reposition
the vehicle and tighten the nut.
bulb housing(s) as
and remove the defective bU|b($)-
a new bulb-and replace the R
and re-connect the multi-plug.
the headlamp assembly on to