Toyota PRIUS Manual page 53

■
AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* Power" to on. (P.55)
®
Leave the Bluetooth
tion where the connection can be es-
tablished.
 When the power switch is in ACCES-
SORY or ON mode, the system searches
for a nearby registered device.
 The system will connect with the regis-
tered device that was last connected, if it
is nearby.
■
CONNECTING MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
Press the "APPS" button and select
"Setup".
2
Select "Bluetooth*".
3
Follow the steps in "CONNECTING A
®
Bluetooth DEVICE" from "STEP 2".
(P.52)
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
■
RECONNECTING THE Bluetooth
PHONE
If a Bluetooth
device in a loca-
due to poor reception from the
Bluetooth
switch is in ACCESSORY or ON mode,
the system automatically reconnects
the Bluetooth
 If the system is attempting to connect to a
Bluetooth
phone is turned off and then back on, the
system will attempt to reconnect.
®
man-
®
2. Bluetooth SETTINGS
®
phone is disconnected
®
network when the power
®
phone.
®
phone and the Bluetooth
PRIUS_Navi_OM47A41U_(U)
15.09.25
®
2
®
53
15:41