Toyota PRIUS Manual page 136

1. VOICE COMMAND SYSTEM OPERATION
 Selecting "Help" or saying "Help"
prompts voice guidance to offer exam-
ples of commands and operation meth-
ods.
4
Say the command displayed on the
screen.
 Registered POIs, registered names in the
contacts list etc., can be said in the place
of the "<>" next to the commands.
(P.142)
For example: Say "Find nearby dining",
"Call John smith" etc.
 If a desired outcome is not shown, or if no
selections are available, perform one of
the following to return to the previous
screen:
• Say "Go back".
• Select "Go Back".
 To cancel voice recognition, select
cel"
, or press and hold the talk switch.
INFORMATION
●
If the system does not respond or the
confirmation screen does not disappear,
press the talk switch and try again.
● "Voice Recognition Prompts" can be set
on the "Voice Settings" screen. (P.63)
● Some voice guidance can be canceled
by setting voice prompts to off. Use this
setting when it is desirable to say a com-
mand immediately after pressing the talk
switch and hearing a beep.
136
■
DISPLAYING THE "Voice Settings"
SCREENS
 Selecting "Voice Settings" can be dis-
played the
(P.63)
■
DISPLAYING THE TRAIN VOICE
RECOGNITION
SCREENS
1
Press the talk switch.
"Can-
No.
Select to train voice recognition.
Select to display the voice recogni-
tion tutorial.
2
Select the desired item to be set.
PRIUS_Navi_OM47A41U_(U)
"Voice Settings" screen.
AND TUTORIAL
Function
15.09.16 19:45