Voice Command System Operation - Toyota PRIUS Manual

INFORMATION
●
The voice command system can be
operated while guidance is being spo-
ken, when "Voice Prompt Interrupt"
(P.63) is set to on. (It is not necessary
to wait for the confirmation beep before
speaking a command.)
●
Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice
commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
●
In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.
●
The ability to dial a contact using voice
commands may take some time after the
power switch is in ACCESSORY or ON
mode, especially when the phone has
many contacts.

1. VOICE COMMAND SYSTEM OPERATION

VOICE COMMAND SYSTEM
OPERATION
The voice command system is operat-
ed by selecting a tab corresponding to
each function. The tabs are found on
the upper part of the screen.
1
Press the talk switch.
2
Select "OK".
 To train voice recognition and to display
the tutorial. (P.136)
 To prevent the screen from being dis-
played again, select "Do Not Tell Me
Again".
3
Say the tab selection command or se-
lect the desired tab.
 Commands related with each function are
displayed on the screen of the each func-
tion tab. Some commonly used com-
mands are displayed on the screen of the
function tab.
PRIUS_Navi_OM47A41U_(U)
4
135
15.09.16 19:45