Lubrication; Greasing And Lubricating The Machine - Toro 74582 Operator's Manual

Lubrication

Greasing and Lubricating the
Machine
Service Interval: Every 25 hours/Yearly (whichever
comes first)—Grease and lubricate
the machine. (Grease and lubricate it
more frequently when operating it in
dusty or sandy conditions.)
Grease the machine with a general-purpose grease.
Refer to Figure 19 and the accompanying table for the
grease locations.
1. Disengage the blades (PTO).
2. Set the parking brake.
3. Stop the engine and wait for all moving parts to stop.
4. Remove the ignition key.
5. Clean the grease fittings with a rag. Scrape any paint
off the front of the fittings.
Grease Locations
Item Name
Front wheel—grease fittings
1
2
Steering ball joints
3 Steering sector gear
4 Steering pinion gear
5 Steering shaft bearing
6
Steering shaft bearing
7 Motion lever—grease fitting
8 Shaft hub for lifting the mower housing
9 Motion link ball joints
10 Brake pedal hubs
11 Parking brake ring
12 Steering bearing
13 Left and Right Spindle—grease fittings
14 Mower housing hinged pins
15 Front axle pivot pins
16 Front axle pivot pins
6. Connect a grease gun to each fitting and pump
grease into it.
7. Wipe up any excess grease.
Quantity Interval (hours)
(pumps)
2 25
4 50
1 50
1 25
1 50
1 50
1 50
1 50
4 50
2 50
1 50
1 25
2 25
6 When removed
2 When removed
2 25
21
Figure 19
Lubricant
Grease
Oil
Grease
Grease
Oil
Oil
Grease
Oil
Oil
Oil
Oil
Grease
Grease
Grease
Grease
Grease