Replacing The Fuel Filter; Electrical System Maintenance; Servicing The Headlights - Toro 74582 Operator's Manual

9. Open the fuel shut-off valve and allow the gasoline
to drain into an approved fuel container or a drain
pan.
Note: Now is the best time to install a new fuel
filter because the fuel tank is empty.
10. Install the fuel line onto the fuel filter.
11. Slide the hose clamp close to the fuel filter to secure
the fuel line (Figure 27).

Replacing the Fuel Filter

Service Interval: Every 100 hours/Yearly (whichever
comes first)
The best time to replace the fuel filter (Figure 27) is
when the fuel tank is empty. Never install a dirty fuel
filter after it has been removed from the fuel line.
1. Park the machine on a level surface.
2. Disengage the blades (PTO).
3. Set the parking brake.
4. Stop the engine and wait for all moving parts to stop.
5. Remove the ignition key.
6. Close the fuel shut-off valve (Figure 28).
Figure 28
1. Fuel shut-off valve
7. Squeeze the ends of the hose clamps together and
slide them away from the old fuel filter (Figure 28).
8. Remove the old fuel filter from the fuel line.
9. Install a new fuel filter and move the hose clamps
close to it.
10. Open the fuel shut-off valve.
Electrical System
Maintenance

Servicing the Headlights

Removing the Bulb
1. Disengage the blades (PTO).
2. Set the parking brake.
3. Stop the engine and wait for all moving parts to stop.
4. Remove the ignition key.
5. Open the hood.
6. Disconnect the wire connectors from both of the
bulb holder terminals.
7. Rotate the bulb holder 1/4 turn counterclockwise
and remove it from the reflector (Figure 29).
26