Check And Clean The Hydraulic Unit Shrouds - Toro 74955CP Operator's Manual

1. Engine guard
2. Engine air intake screen
3. Bolt
Check and Clean the Hydraulic
Unit Shrouds
Service Interval: Before each use or daily
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Raise the seat.
4. Clean the debris and grass from the hydraulic unit
shrouds (Figure 75).
5. Lower the seat.
Figure 74
4. Fan housing
5. Screw
1. Hydraulic unit shrouds
48
Figure 75