Changing The Engine Oil - Toro 74955CP Operator's Manual

2
1
3
4
7
6
9
8
Figure 50

Changing the Engine Oil

Service Interval: After the first 8 hours
Note: Dispose of the used oil at a recycling center.
G008804
1. Start the engine and let it run five minutes. This
2. Park the machine so that the rear is slightly lower
3. Disengage the PTO, move the motion control levers
5
4. Stop the engine, remove the key, and wait for all
10
G008792
36
Every 100 hours (more often in dirty
or dusty conditions)
warms the oil so it drains better.
than the front to ensure the oil drains completely.
to the neutral locked position and set the parking
brake.
moving parts to stop before leaving the operating
position (Figure 51).
1
3
4
Figure 51
G008804
2
4
5
G008793