Toro 30626 Operator's Manual page 12

105-7823
(Models 30630 & 30631)
1. Traction drive—to drive forward, press the top of the traction
control pedal forward and down; to drive in reverse, press
the bottom of the traction control pedal rearward and down.
2. Warning—disengage the power take-off (PTO) before
raising the cutting unit(s).
3. Float the cutting unit(s) over the ground.
4. Lower the cutting unit(s).
5. Raise the cutting unit(s).
106-5976
1. Engine coolant under
pressure
2. Explosion hazard—read
the Operator's Manual.
3. Warning—do not touch
the hot surface.
4. Warning—read the
Operator's Manual.
(Models 30630 & 30631)
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
(Models 30626 & 30627)
1. Thrown object hazard—keep bystanders a safe distance
from the machine.
2. Cutting hazard of hand and foot—stay away from moving
parts.
(Models 30630 & 30631)
1. To start the engine, read the Operator's Manual, disengage
the power take–off (PTO), place the traction drive in
neutral, press the brake, move the throttle lever to the Fast
position, turn the key to the Engine—power position until
the glow plug light illuminates, and then turn the key to the
Engine—start position.
2. To over-ride the engine temperature warning, press the
button.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
12
106-6754
106-8120
107-2927