Install Muffler; Install Muffler Guard - Toro GTS 200 Service Manual

Install Muffler

1. Coat muffler mounting screws with Valve Guide
Lubricant, Briggs & Stratton Part #93963.
2. Place new exhaust gasket on cylinder head and place
muffler flange on gasket.
3. Install two screws in muffler flange and torque to
85 in. lbs. (10.0Nm), Fig. 151.
1
1
Fig. 151 – Installing Muffler
1. Screw: torque to 85 in. lbs (10.0Nm)
4. Install screw in muffler bracket to cylinder head and
torque to 85 in. lbs. (10.0Nm), Fig. 151.
5. Install screw in muffler to cylinder bracket and torque to
85 in. lbs. (10.0Nm).
Muffler

Install Muffler Guard

1. Lightly coat muffler guard mounting screws with Valve
Guide Lubricant, Briggs & Stratton Part #93963.
2. Place muffler guard over muffler and torque muffler guard
to bracket screw to 85 in. lbs. (10.0Nm), Fig. 148.
3. Torque muffler guard to cylinder screw to 50 in. lbs.
(6.0Nm).
4. Torque muffler guard to blower housing screw to
15 – 20 in. lbs. (2Nm).
5. Install blower housing as described in Rewind Starter,
Page 37.
6. Install dipstick tube and dipstick.
7. Install fuel tank and static guard.
1
60
GTS 200