Product Overview
1. Seat
2. Control panel
3. Motion control levers
Controls
Become familiar with all of the controls Figure 4
and Figure 5 before you start the engine and
operate the machine.
Figure 4
1. Motion control lever
2. Parking brake lever
Figure 3
4. Height of cut lever
5. Parking brake
6. Mower deck
3. Height-of-cut lever
7. Anti-scalp wheel
8. Front castor wheel
9. Footrest
1. Ignition switch
2. Choke
3. Throttle
Parking Brake
The parking brake is automatically set when the
motion control levers are in the brake position.
Always position the motion control levers into the
brake position when you stop the machine or leave
it unattended.
11
10. Discharge chute
11. Gas tank
12. Rear drive wheel
Figure 5
4. Blade control switch
(power take-off)
5. Headlight—optional