Figure 22
Position C
This is the full open position. The suggested use for
this position is as follows.
• Use in tall, dense grass mowing conditions.
• Use in wet conditions.
• Lowers the engine power consumption.
• Allows increased ground speed in heavy conditions.
• This position is similar to the benefits of the Toro
SFS mower.
Figure 23
Using the Lift Assist Lever
The lift assist lever is used along with the height-of-cut
lever for raising the mower. This allows for easier
raising of the mower.
1. Place your foot onto lift assist lever.
2. Press on the lift assist lever while pulling up on the
height-of-cut lever (Figure 24).
1. Lift Assist Lever
Positioning the Seat
The seat can move forward and backward. Position the
seat where you have the best control of the machine
and are most comfortable.
Important: To adjust, move the lever sideways to
unlock seat (Figure 25).
Slide the seat to the desired position and release lever
to lock in position.
1. Adjustment lever
Unlatching the Seat
Push the seat latch rearward to unlatch the seat.
This will allow access to the machine under the seat
(Figure 26).
23
Figure 24
Figure 25