Mounting; Uninstallation - Danfoss 088U0215 Instruction

Cf-rf room thermostat with infrared floor sensor

Instruction

5. Mounting

Placing a room thermostat (fig. 3)

• A room thermostat should be placed in accordance

with fig. 3.

IMPORTANT!

Wherever possible, a room thermostat should be installed

at a place where the effect of sunlight, strong artificial

light (e.g. halogen spotlight), draught, other heat-emitting

equipment (e.g. TVs) etc. is avoided.

Please note that no furniture, rugs etc. should be perma-

nently placed within the area of the InfraRed Floor Sensor as

shown in fig. 3.

Activate Uninstall mode on Master Controller (fig. 1)

• Use the Menu selection button  to choose the Unin-

stall menu. Uninstall LED  flashes.

• Activate Uninstall mode by pressing OK . Uninstall

LED  goes ON.

Deselect output on Master Controller

• Select output to be removed by output selection

button .

• Remove flashing output  with OK .

Danfoss Heating Solutions

CF-RF Room Thermostat with Infrared Floor Sensor

VIUHR402

Table of Contents

Show Quick Links