Toro 74902TE Operator's Manual page 12

126-2055
1. Wheel lug nut torque 95 ft-lb (129 N-m) (4x)
2. Wheel hub nut torque 235 ft-lb (319 N-m)
3. Read and understand the Operator's Manual before
performing any maintenance, check torque after first 100
hours then every 500 hours thereafter.
127-0326
1. Read the Operator's
Manual.
2. Height-of-cut
1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained. 6. Crushing/dismemberment hazard of bystanders—do not carry
3. Warning—engage the parking brake, stop the engine and
remove the ignition key; read the instructions before servicing
or performing maintenance.
4. Thrown object hazard—Stop the engine and pick up debris
before operating, keep bystanders a safe distance from the
machine, keep deflector in place
3. Remove the key from
the ignition and read the
Operator's Manual before
performing maintenance
or servicing the machine.
1. Maximum drawbar pull 36
kg (80 lb)
114–4468
5. Loss of traction/control hazard, slopes—loss of traction/control
on a slope, disengage the blade control switch (PTO),
proceed off the slope slowly.
passengers, look forward and down when operating the
machine, look behind and down when reversing.
7. Cutting/dismemberment hazard; hand or foot—stay away
from moving parts and keep all guards and shields in place.
12
131-4036
2. Read the Operator's
Manual.