Table of Contents
Advertisement
STEP 3:
BroadBand Connection Settings
for Fibre (Optional)
3.1
Connect the Residential Gateway's
"BROADBAND" Port to the ONT
"LAN 1" Port highlighted in Yellow
using the Ethernet Cable (RJ45)
Note:
Switch off the ONT power before you do
the set up.
3.2
For mio TV Set Top Box, personal
computer or laptop, please connect
it to the "LOCAL ETHERNET" Port
highlighted in Yellow.
For mio Voice service, please
3.3
connect your phone using a Phone
Cable (RJ11) to the Residential
Gateway's "VOICE 1&2" Port.
3.4
Once Power Adapter is connected,
follow the power up sequence as
below.
1.
Power up the Optical Network Terminal
(ONT). Wait for "POWER" and "PON"
LEDs to turn to stable green light.
2.
Power on the Residential Gateway.
Wait for the "POWER", "ETHERNET",
"BROADBAND", "INTERNET" and "IPTV"
(if applicable) to turn to stable green
light.
3.
Power up you mio TV Set Top Box and
your computer.
Note:
For exStream service, there is no need to
key in user ID and password. All service
credential will be auto push down to your
Residential Gateway.
.
Advertisement
Table of Contents
