Table of Contents
Advertisement
STEP 2:
Setting Up Your BroadBand Connection
2.1
Using
the
(RJ11), connect the Residential
Gateway's"DSL" Port to the DSL
Microfilter's "DSL" port.
2.2
Insert the head of the DSL
Microfilter into your Telephone
the wall socket.
Note: You can connect your telephone
into the DSL Microfilter's "Phone" port to
use your fixed Phoneline.
2.3
Connect Power Adapter to your
Residential Gateway "POWER"
port and the mearest electrical
outlet. Turn
at the electrical outlet and the
Residential Gateway
LED Check:
Please wait for approximately 5 minutes.
The "POWER" and the "BROADBAND"
LEDs should now be stable
blinking), except the "ETHERNET" LED,
it should be GREEN and blinking. If not,
please check connections 2.1 to 2.3. Do
NOT proceed to the next section until
you have done so.
Telephone
Cable
"On" the power
GREEN
(not
Advertisement
Table of Contents
