Table of Contents
Advertisement
Product Overview
3
4
G021277
1. Blade-control bar
2. Recoil-start handle
3. Oil fill/Dipstick
4. Spark plug
1
2
5
6
7
8
Figure 6
5. Grass bag
6. Fuel-tank cap
7. Air filter
8. Cutting-height lever (4)
Operation
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Filling the Fuel Tank
Recommended Fuel:
•
For best results, use only clean, fresh (less than 30 days
old), unleaded gasoline with an octane rating of 87 or
higher ((R+M)/2 rating method).
•
Ethanol: Gasoline with up to 10% ethanol (gasohol)
or 15% MTBE (methyl tertiary butyl ether) by volume
is acceptable. Ethanol and MTBE are not the same.
Gasoline with 15% ethanol (E15) by volume is not
approved for use. Never use gasoline that contains
more than 10% ethanol by volume, such as E15
(contains 15% ethanol), E20 (contains 20% ethanol), or
E85 (contains up to 85% ethanol ). Using unapproved
gasoline may cause performance problems and/or engine
damage which may not be covered under warranty.
•
Do not use gasoline containing methanol.
•
Do not store fuel either in the fuel tank or fuel containers
over the winter unless a fuel stabilizer is used.
•
Do not add oil to gasoline.
Important: To reduce starting problems, add fuel
stabilizer to the fuel all season, mixing it with gasoline
less than 30 days old; run the machine dry before storing
it for more than 30 days.
Do not use fuel additives other than a fuel
stabilizer/conditioner. Do not use fuel stabilizers
with an alcohol base such as ethanol, methanol, or
isopropanol.
6
Advertisement
Table of Contents
