Servicing The Fuel Vent System; Electrical System Maintenance; Servicing The Fuse - Toro 30074 Operator's Manual

Commercial walk-behind mower
Hide thumbs Also See for 30074:
Table of Contents

Advertisement

5. Remove the filter from the fuel lines.
6. Install a new filter and move the hose clamps close
to the filter.
7. Open fuel shut-off valve at fuel tank (Figure 36).
8. Check for fuel leaks and repair if needed.

Servicing the Fuel Vent System

Service Interval: Every 200 hours/Yearly (whichever
comes first)
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the existing fuel vent filter (Figure 38).
4. Install a new filter.
1 2
Figure 38
1. Fuel vent filter
g014686
2. Right side of motor
Electrical System
Maintenance

Servicing the Fuse

The electrical system is protected by a fuse. It requires
no maintenance. If the fuse blows, check the component
or circuit for malfunction or a short. To replace the fuse,
pull out on the fuse (Figure 39) to remove or replace it.
1. Fuse, 7.5 amp, blade type
29
Figure 39

Advertisement

Table of Contents
loading

This manual is also suitable for:

300763007830079

Table of Contents