Adjusting The Handle Height - Toro 30074 Operator's Manual

Figure 14
40 inch, 48 inch, and 52 inch Mower Decks
1. Mower deck
2. Bolt
3. Spacer
Figure 15
40 inch, 48 inch, and 52 inch Mower Decks
1. Mower deck
2. Bolt
3. Spacer
4. Anti-scalp rollers
5. Nut
4. Bushing
5. Anti-scalp rollers
6. Nut
36 inch Mower Deck
1. Mower deck
2. Bolt
3. Spacer
5. In certain mowing conditions and terrain, a
mismatch of cutting height may be seen. Adjusting
the outside anti-scalp rollers to the minimum setting
of 3/8 inch (10 mm) will help prevent the mower
deck cutting too low on the outside and minimize
the mismatch.

Adjusting the Handle Height

The handle position can be adjusted to match the
operator's height preference.
1. Remove the hairpin cotter, washer and clevis pin
securing control rod fitting to the idler bracket
(Figure 17).
1. Control rod and fitting
2. Idler bracket
3. Clevis pin
18
Figure 16
4. Anti-scalp rollers
5. Nut
Figure 17
4. Washer
5. Hairpin cotter
6. Rod fitting