Download Print this page

One For All Kameleon URC-9964B00 User Manual: Adjusting The Display; Adjusting Brightness

8-device universal remote control with ir/rf base station.
Hide thumbs

Advertisement

OFA Kameleon wRF UG rev 3.fm Page 13 Monday, September 13, 2004 11:18 AM

ADJUSTING THE DISPLAY

Your new remote has several ways to adjust the display for your comfort and
best use.
A
B
DJUSTING
RIGHTNESS
The OFA Kameleon 8-Device Remote with RF has five levels of brightness
adjustment and is set to the middle one at the factory. To increase or decrease
the brightness, perform the following steps:
NOTE: Increasing the brightness of the display can decrease battery life.
1.
Press and hold SETUP until the two bottom IR segments flash twice. The
Program Keys appear.
2.
Press
(Brightness) once.The Brightness programming screen
appears:
Adjusting The Display
U
SER
NOTE: . If the display turns off because of
inactivity, you must start the programming
sequence again by repeating this step.
To increase brightness, press
one or more times.
To decrease brightness, press
one or more times.
3.
When the desired brightness is
achieved, press HOME twice to exit
programming and return to the last-
selected device menu screen.
NOTE: Otherwise, to program other features,
press HOME only once to return to the
Program Keys.
'
G
S
UIDE
13

Advertisement

   Related Manuals for One for All Kameleon URC-9964B00

   Related Content for One for All Kameleon URC-9964B00

Comments to this Manuals

Symbols: 0
Latest comments: