OFA Kameleon wRF UG rev 3.fm Page 55 Monday, September 13, 2004 11:18 AM
Favorite channel function does not work properly.
Some devices (e.g.,Cable Boxes or Satellite Receivers) use
two-digit channel numbers. During programming, press
ENTER or OK once after entering a channel number (e.g., 0 2
ENTER for channel 2). See Programming Favorite Channel
Scan on page 39.
Changing channels does not work properly.
If the original remote control required pressing ENTER to
change channels, then press ENTER on the remote control
after entering channel numbers.
No remote control of volume.
See Changing Volume Lock on page 27 to lock/unlock
Two bottom IR segments flash when a key is pressed, but
home entertainment device does not respond.
Make sure the remote control is aimed at your home
entertainment device and is not farther than 15 feet away.
and CH do not work for your RCA TV.
Due to RCA design (1983-1987), only the original remote
control will operate these functions.
Pressing SCROLL one or times in CD, DVD, PVR or Home
Theater mode, does not display a secondary menu screen.
Even though SCROLL is displayed, for these modes, there are
no additional menu screens.
Cannot program my combo device code.
Make sure have selected the correct device key for your