3. Disassembly and Reassembly
MAGNETRON, MOTOR ASSEMBLY, VENT BLOWER AND HIGH VOLTAGE TRANSFORMER
Oven must be removed from wall.
REMOVING OVEN FROM WALL ( PEOPLE REQUIRED)
Oven is hooked on metal tabs at bottom of wall mounting plate and to cabinet by (3) top cabinet bolts .
3-1 Disassembly of Assembly Grille and Panel Outer
Parts
Grille
Panel Outer
Explaination Photo
10
Explaination
1. Disconnect oven power .
. Remove Grille .
1) Remove 2 screws
) Slide the Grille to the left, then pull it
straght out .
1. Disconnect oven power .
. Remove Grille .
3. Remove Screw .(7)
4. Remove Screw .(4)