Others; Part Names - Pioneer VSX-831 Basic Manual

> Before start > Hookup

Others

Listening To the Radio
a
1. Press TUNER (a) on the remote controller repeatedly to select either
2. Press MODE (c) on the remote controller, so that the "TunMode: Auto" is
b
3. When you press the
You can preset up to 40 stations.
1. Tune into the AM/FM radio station you want to register.
2. Press +Fav (d) on the remote controller or +FAVORITE on the main unit
3. While the preset number is flashing (about 8 seconds), repeatedly press
c
d
4. Press +Fav (d) again on the remote controller or +FAVORITE on the
e
0 To delete a preset station, press the  /
Frequency step setting
Press the
"Miscellaneous" – "Tuner" – "AM/FM Frequency Step" or "AM Frequency
Step" and select the frequency step for your area. Note that when this
setting is changed, all radio presets are deleted.
16
> Setup
"AM" or "FM" on the display.
displayed on the display.
/ cursor (b) buttons on the remote controller,
automatic tuning starts, and searching stops when a station is found.
When tuned into a radio station, the "TUNED" indicator on the display
lights.
so that the preset number on the display flashes.
the  / cursor (b) buttons on the remote controller to select a number
between 1 and 40.
main unit to register the station. When registered, the preset number
stops flashing. To select a preset radio station, press the  /
buttons on the remote controller.
remote controller to select the preset number you want to delete, press
+Fav (d) on the remote controller or +FAVORITE on the main unit and
then press CLEAR (e) while the preset number is flashing. When
deleted, the number on the display goes off.
button on the remote controller to select "System Setup" –
> Playback > Part Names
AV Adjust
By pressing the
adjust frequently used settings, such as the sound quality, using on-screen
menus. Select the item with the cursors of the remote controller and press
ENTER to confirm your selection. To return to the previous screen, press
. Note that there is no display on the TV screen when the input selector
is "CD", "TV", "PHONO", "FM", or "AM", so follow the main unit's display
while doing the operations.
0 You can adjust the sound quality with "Tone". "Other" includes settings
such as "Sound Delay" that allows you to adjust the audio delay when
the video is behind the audio, "Sound Retriever" that provides better
cursor (b)
sound quality for compressed audio.
cursor (b) buttons on the
button on the remote controller during play, you can
AV Adjust
Tone Bass
Level Treble
MCACC
Other
BD/DVD