Rear Panel - Pioneer VSX-831 Basic Manual

> Before start > Hookup

Rear Panel

1 2
9
1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV
component digital audio signals with a digital optical
cable or digital coaxial cable.
2. ANTENNA AM LOOP/FM 75Ω terminal: The supplied
antennas are connected.
3. VIDEO IN jacks: Input the AV component video signals
with an analog video cable.
4. NETWORK port: Connect to the network with an
Ethernet cable.
5. HDMI OUT jacks: Transmit video signals and audio
signals with a HDMI cable connected to a TV.
6. HDMI IN jacks: Transmit video signals and audio signals
with a HDMI cable connected to an AV component.
7. Wireless antenna: Used for Wi-Fi connection or when
using a BLUETOOTH enabled device. Adjust their
> Setup
3 4 5
10 11
angles according to the connection status.
8. Power cord
9. SIGNAL GND terminal: The ground wire of the turntable
is connected.
10.AUDIO IN jacks: Input AV component audio signal with
an analog audio cable.
11. SPEAKERS terminals: Connect speakers with speaker
cables. (North American models are compatible with
banana plugs.)
12.SUBWOOFER PRE OUT jack: Connect a powered
subwoofer with a subwoofer cable. Up to two powered
subwoofers can be connected. The same signal is output
from each of the SUBWOOFER PRE OUT jacks.
> Playback > Part Names
6 7
12
8
7
90°
180°
19