Positioning The Flow Baffle - Toro 30696 Operator's Manual

Figure 15
1. Cam lock
2. Lever

Positioning the Flow Baffle

The following figures are only recommendations for
use. Adjustments will vary by grass type, moisture
content, and height of grass.
Note: If the engine power draws down and the mower
ground speed is the same, open up the baffle.
3. Rotate cam to increase or
decrease locking pressure
4. Slot
Position A
This is the full rear position. The suggested use for this
position is a follows (Figure 16).
• Use for short, light grass mowing conditions.
• Use in dry conditions.
• For smaller grass clippings.
• Propels grass clippings farther away from the
mower.
Position B
Use this position when bagging (Figure 17).
19
Figure 16