Adjusting The Handle Height - Toro 30696 Operator's Manual

Figure 17
Position C
This is the full open position. The suggested use for
this position is as follows (Figure 18).
• Use in tall, dense grass mowing conditions.
• Use in wet conditions.
• Lowers the engine power consumption.
• Allows increased ground speed in heavy conditions.
• This position is similar to the benefits of the Toro
SFS mower.

Adjusting the Handle Height

The handle position can be adjusted to match the
operator's height preference.
1. Remove hairpin cotter, washer and clevis pin
securing control rod fitting to idler bracket
(Figure 19).
20
Figure 18