Omron HBF-500 Instruction Manual page 35

HOW TO USE THE MEMORY FUNCTION
Viewing Previous Measurement Results
Follow this procedure if you just want to view and compare previous measurement results, without
taking a measurement.
1. Press the Power Switch to turn the monitor ON.
The CAL symbol blinks on the display, then the display
changes to 0.0 lb.
Wait until 0.0 lb appears on the display.
NOTE: If you step onto the measurement platform before
0.0 lb appears on the display, an error message
"Err" will appear.
2. When the 0.0 lb appears on the display, lift the Display
Unit out of the Display Unit Holder.
NOTE: Do not take out the display unit until 0.0 lb
appears on the display.
3. Press the desired Personal Profile Number button.
Ex.: To select Personal Profile
Number "1", press button
35
.