Introduction; Explanation Of Symbols; Safety Precautions - Worcester GREENSTAR HEATSLAVE II External 12/18 User Instructions

1

Introduction

1.1

Explanation of symbols

Warning symbols
Safety instructions in this document are
framed and identified by a warning triangle
which is printed on a grey Background.
Key words indicate the seriousness of the hazard in terms of
the consequences of not following the safety instructions.
• NOTICE indicates possible damage to property or
equipment, but where there is no risk of personal injury.
• CAUTION indicates possible personal injury.
• WARNING indicates possible severe personal injury.
Important information
Notes contain important information in cases
where there is no risk of personal injury or
material losses and are identified by the
symbol shown on the left. They are bordered
by horizontal lines above and below the text.
Additional symbols
Symbol
1. a numbered step in an action sequence
▶ a step in an action sequence
•
–
Greenstar Heatslave II External
Meaning
a list entry
a list entry (second level)
ErP – 6 720 813 722 (2014/09)
1.2

Safety precautions

Oil fumes or leaks from the boiler:
• Switch off the boiler electricity supply.
• Isolate the fuel supply to the boiler.
• Contact installer/service engineer.
This boiler must only be operated by a responsible adult
who has been instructed in, understands and is aware of
the boiler's operating conditions and effects.
Health and safety
The appliance contains no asbestos and no substances have
been used in the construction process that contravene the
COSHH Regulations (Control of Substances Hazardous to
Health Regulations 1988). Where applicable, the CE mark
indicates compliance with relative EU Directives.
Combustible and corrosive materials
Do not store or use any combustible materials (paper, thinners,
paints etc.) inside or within the vicinity of the boiler.
The combustion air must be kept clear of chemically aggressive
substances which can corrode the boiler and invalidate any
warranty.
Fitting and modifications
Fitting the boiler and any controls to the boiler may only be
carried out by a competent engineer in accordance with the
relevant Installation Regulations.
Flue systems must not be modified in any way other than as
described in the fitting instructions.
Any misuse or unauthorised modifications to the boiler, flue or
associated components and systems could invalidate the
warranty. The manufacturer accepts no liability arising from
any such actions, excluding statutory rights.
This boiler is suitable for use with Kerosene (Class C2)only, no
other fuel may be used.
Do not operate the appliance when
• The appliance, flue or system is incorrectly fitted, faulty or
damaged.
• The flue terminal outlet is obstructed or damaged.
• There are fumes, fuel leaks or fuel smells from the fuel
supply, appliance or internal flue system.
• The system is empty, frozen or unpressurised.
• The condensate pipe is blocked or restricted.
• The appliance clearances are inadequate.
• The air supply is restricted or vents damaged.
Introduction
3