Basic Controls - Panasonic TH-60PF50E Operating Instructions Manual

Basic Controls

Main Unit
Brightness Sensor
Detects the brightness in the viewing environment
Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will
still consume some power as long as
the power cord is still inserted into the
wall outlet.)
• Standby ........ Red
Orange (When "Slot power" is set to
"On".)
Orange (Depending on the type of the function board installed, when the power is supplied to
the slot)
Orange (When "Control I/F Select" is set to "LAN" or "WEB Control" is set to "On". Refer to
"Operating Instructions, Network Operations")
• Power-ON ...... Green
• PC Power management (DPMS)
........................ Orange (With PC input signal.)
When this function is set to ON, it operates under the following conditions to turn the power on
or off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal
input:
When pictures (HD/VD sync signals) are subsequently detected:
• DVI-D Power management
........................Orange (With DVI input signal.)
• No Signal power off
........................Red
Equipment power supply is turned OFF when there is no signal.
When this is set to "Enable", the power supply of the unit goes Off 10 minutes after the input
signals stop.
14
INPUT MENU
Power is turned off (standby); the power indicator lights up orange.
Power is turned on; the power indicator lights up green.
+
-/ VOL / ENTER/
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu
screen will switch.
Normal Viewing
Sound Pos./Size
INPUT button
(INPUT signal selection)
Volume Adjustment
Volume Up "+" Down "–"
When the menu screen is
displayed:
"+" : press to move the cursor
up
"–" : press to move the cursor
down
Enter / Aspect button
Picture
Setup