Before Starting; Mix Gasoline And Oil - Toro 38412 CCR 2400 GTS Operator's Manual

Table of Contents

Advertisement

Before Starting

POTENTIAL HAZARD
In certain conditions gasoline is extremely
flammable and highly explosive.
WHAT CAN HAPPEN
A fire or explosion from gasoline can burn
you, others, and cause property damage.
HOW TO AVOID THE HAZARD
Use a funnel and fill the fuel tank outdoors,
in an open area, when the engine is cold.
Wipe up any gasoline that spills.
Do not fill the fuel tank completely full.
Add gasoline to the fuel tank until the level
is 1/4" to 1/2" (6 mm to 13 mm) below the
bottom of the filler neck. This empty space
in the tank allows gasoline to expand.
Never smoke when handling gasoline, and
stay away from an open flame or where
gasoline fumes may be ignited by a spark.
Store gasoline in an approved container
and keep it out of the reach of children.
Never buy more than a 30-day supply of
gasoline.
Mix Gasoline And Oil (Fig. 11)
Use clean, fresh lead-free gasoline, including
oxygenated or reformulated gasoline, with an octane
rating of 85 or higher. To ensure freshness, purchase
only the quantity of gasoline that can be used in 30
days. Use of lead-free gasoline results in fewer
combustion chamber deposits and longer spark plug
life. Use of premium grade fuel is not necessary or
recommended.
1.
APPROVED OIL—For simplicity and best
engine performance, mix the contents of one
5.2–ounce bottle of Toro 50:1 Two–Cycle Oil
with two gallons of fresh, unleaded regular
gasoline.
10
Toro Two–Cycle Oil is specially formulated to
provide superior lubrication, make starting easy,
and prolong engine life. If Toro Two–Cycle Oil
is not available, mix two gallons of gasoline and
5.2 ounces of another high grade two–cycle oil
that has the NMMA or BIA–TCW III
certification printed on the label.
NEVER USE AUTOMOTIVE OIL (i.e. SAE
30, 10W30 etc.), TWO–CYCLE OIL THAT IS
NOT CERTIFIED NMMA/BIA–TCW III, OR
THE WRONG MIX RATIO BECAUSE THE
ENGINE CAN BE DAMAGED, AND IT
WOULD NOT BE COVERED BY THE TORO
WARRANTY.
2.
Mixing Gasoline and Oil—Pour a half gallon of
gasoline into an approved gasoline container
(preferably plastic, not metal) and add the correct
amount of two–cycle oil. Reinstall cap on
gasoline container and shake the container to
mix oil and gas thoroughly. Remove cap and add
remaining amount of gasoline.
Toro also recommends that Toro
Stabilizer/Conditioner be used regularly in all
Toro gasoline powered products during operation
and storage seasons. Toro Stabilizer/Conditioner
cleans the engine during operation and prevents
gum–like varnish deposits from forming in the
engine during periods of storage.
Note:
A fuel stabilizer/conditioner is most
effective when mixed with fresh
gasoline.
IMPORTANT: NEVER USE METHANOL,
GASOLINE CONTAINING METHANOL,
GASOHOL CONTAINING MORE THAN
10% ETHANOL, PREMIUM GASOLINE,
OR WHITE GAS BECAUSE ENGINE
FUEL SYSTEM DAMAGE COULD
RESULT.
DO NOT USE FUEL ADDITIVES OTHER
THAN THOSE MANUFACTURED FOR
FUEL STABILIZATION DURING
STORAGE SUCH AS TORO'S
STABILIZER/CONDITIONER OR A
SIMILAR PRODUCT. TORO'S
STABILIZER/CONDITIONER IS A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

38418 ccr 2400 gts38433 ccr 3000 gts38438 ccr 3000 gts

Table of Contents