Warning Indicators; Auxiliary Function; Changing The Delay Time; Canceling The Time Delay - Beko DPU 7440 User Manual

Auxiliary function

Cancel audio warning
Your dryer will give an audio warning when the
programme comes to an end or each time you press
the buttons. If you want to disable the audio warning,
press the Programme "-" and End Time "+" buttons
simultaneously for 3 seconds. "off-bzr-off" appears on
the display. Machine does not give an audio warning at
the end of the programme or when a button is pressed.
You can enable the audio warning by pressing the same
buttons simultaneously again for 3 seconds. If you
do so, "on-bzr-on" appears on the display and audio
warning is enabled.
C
You can select this function either before or after
the programme starts.

Warning indicators

C
Warning indicators may differ according to the
model of your machine.
Lint filter cleaning
A warning light will turn on to remind filter cleaning after
the programme finishes.

Water tank

A warning symbol will turn on at the end of the
programme or when the tank is full with water. The
machine stops operating when this warning symbol
lights up while a programme is running. To restart the
machine, please drain the water in the water tank. Press
"Start/Pause/Cancel" button to start the program after
you have emptied the water tank. The warning symbol
goes off and the program resumes operating.
Specifying the end time (time delay)
With the "Time delay" function you can delay the ending
time of the programme up to 24 hours.
1. Open the loading door and put the laundry in.
2. Once the programme is selected, set the end time
with end time ''+'' , ''-'' buttons. End time symbol
flashes.
Press "Start/Pause" button to start the time delay
function. Delay time appears on the display; meanwhile,
the End Time symbol and Start/Pause symbol
illuminates. The time on the display is the total of normal
drying time and delay time.

Changing the delay time

If you want to change the time during the countdown:
1. Press Start/Pause/Cancel button. Meanwhile the
End Time symbol illuminates and Start/Pause
symbol flashes.
2. Press End Time ''+'' , ''-'' buttons to set the new
end time. End Time symbol and Start/Pause
symbol flash while making the new settings.
3. Press Start/Pause button to complete setting the
new end time. End Time symbol and Start/Pause
symbol flash.
C
When setting the end time again, End Time symbol
turns off and Start/Pause symbol flashes once the
actual programme duration appears on the display.
Programme starts immediately without any delay if
you press Start/Pause/Cancel button.

Canceling the time delay

If you want to cancel the time delay countdown and start
the programme immediately:
1. Press "Start/Pause/Cancel" button for 3 seconds to
cancel the programme.
2.Then, press "Start/Pause/Cancel" button to select the
desired programme.
Changing the programme after it has
started
You can use this feature to dry your clothes under higher
or lower temperatures after your dryer has started.
For example;
1. Press and hold the "Start/Pause/Cancel" button
for about 3 seconds to "Cancel" the programme in
order to select "Extra Dry" programme instead of
"Iron Dry" programme.
40 EN