Dyna-Glo BF10PTDG/PMDG Manual page 27

TROUBLESHOOTING
PROBLEM
Fan is not spinning.
(Select Models)
Fan is making a
loud noise.
(Select Models)
POSSIBLE CAUSE
1. There is no power to the fan.
2. Fan is set to "AUTO".
3. Fan motor is bad.
1. Fan housing or blades
are dirty.
2. Fan rotation is blocked.
3. Defective fan.
CORRECTIVE ACTION
1. Verify fan is plugged in and
set to "MAN" or "AUTO".
2. Allow 5-10 minutes for fan to
engage.
3. Replace fan.
1. See "Cleaning Fan", page 22.
2. Verify wiring is not in fan path.
3. Replace fan.
26