Table of Contents
Advertisement
Turning the Controls and Buttons Tones On or Off
You can enable and disable the tones of Navigation
buttons and controls if needed.
•
Turning the tones on or off via the preprogrammed
Mute button:
a) To turn the tones off or on, press the
preprogrammed Mute button.
•
Turning the tones on or off via the radio menu:
a) Press the Menu Select button directly below
Mute.
The display shows momentary Tones off,
indicating that the tones are disabled or the
display shows momentary Tones on, and you
hear a short tone indicating that the tones are
enabled.
Turning Voice Mute On or Off
You can enable and disable voice transmission, if
needed.
•
Turning Voice Mute on or off via the
preprogrammed Voice Mute button:
62
English
a) To turn the feature off or on, press the
preprogrammed Voice Mute button.
•
Turning Voice Mute on or off via the radio menu:
a) Press the Menu Select button directly below
VMut.
The display shows momentary Voice mute off, and
you hear a short tone, indicating that the feature is
disabled or the display shows momentary Voice
mute on, and you hear a short tone, indicating that
the feature is enabled.
Using the Time-Out Timer
This feature turns off your radio's transmitter. You
cannot transmit longer than the preset timer setting.
If you attempt to do so, the radio automatically stops
your transmission, and you hear a talk-prohibit tone.
The timer is defaulted at 60 seconds, but it can be
preprogrammed from 3 to 120 seconds, in 15-second
intervals, or it can be disabled entirely for each radio
mode, by a qualified radio technician.
Note: You hear a brief, low-pitched, warning tone four
seconds before the transmission times out.
Advertisement
Table of Contents
