Ten-Haaft CARO Digital MA Operating Instructions Manual page 74

Insert blank:
Inserts a blank entry. The subsequent channels are moved downward accordingly.
Note: As with the option „Cut", this function determines areas with channels
marked as „unused" as the end of a block.
E
Pack:
This option is only available if you have highlighted a block. Within this block, all
free positions marked „unused" are deleted by moving the channels upward. The
unused entries are then positioned in sequence at the end of the block. Functions
utilizing a target entry will prompt you to select a target entry after the selection
of the corresponding menu option. To do this, navigate to the entry in the list and
confi rm with OK.
You can cancel the preceding steps by pressing EXIT as long as you have not com-
pleted a function. As an alternative to the direct editing of the channel list, a cache
memory is available for the convenient execution of complex sorting procedures.
Further operating information concerning the individual functions will be displayed
on screen.
74