Hardware Repair And Upgrade; Warnings And Cautions; Additional Information - HP ProOne 400 G1 All-in-One Hardware Reference Manual

Hide thumbs Also See for ProOne 400 G1 All-in-One:
Table of Contents

Advertisement

3

Hardware repair and upgrade

Warnings and cautions

Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and
warnings in this guide.
WARNING!
Disconnect the power cord from the wall outlet and allow the internal system components to cool
before touching.
Do not plug telecommunications or telephone connectors into the network interface controller (NIC)
receptacles.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation,
setup, posture, and health and work habits for computer users, and provides important electrical and
mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo.
WARNING!
speakers, chests, or carts may fall over and cause personal injury.
Care should be taken to route all cords and cables connected to the computer so that they can not be
pulled, grabbed, or tripped over.
WARNING!
Disconnect power to the equipment before removing the access panel.
Replace and secure the access panel before reenergizing the equipment.
CAUTION:
equipment. Before beginning these procedures, be sure that you are discharged of static electricity by
briefly touching a grounded metal object. See
information.
When the computer is plugged into an AC power source, voltage is always applied to the system
board. You must disconnect the power cord from the power source before opening the computer to
prevent damage to internal components.

Additional information

For more information on removing and replacing hardware components, the Computer Setup utility,
and troubleshooting, refer to the Maintenance and Service Guide (available in English only) for your
computer model at http://www.hp.com.
To reduce the risk of personal injury from electrical shock, hot surfaces, or fire:
Computers that are inappropriately situated on dressers, bookcases, shelves, desks,
Energized and moving parts inside.
Static electricity can damage the electrical components of the computer or optional
Electrostatic discharge on page 48
for more
Warnings and cautions
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents