Table of Contents
Advertisement
Camera: Shooting options and settings
Focus area
Use this option to change the positions of the focus area.
Generally, cameras focus on the nearest subject. When there are a lot of subjects, however,
unwanted subjects can be in focus. To prevent unwanted subjects from being in focus,
change the focus area so that a desired subject is in focus. You can get a clearer and sharper
photo by selecting an appropriate focus area.
In expert mode, tap
• C entre AF: Use this to focus on the centre of the frame.
• M ulti AF: Use this to focus on multiple areas. The photo is divided into two or more areas,
and the camera obtains focus points of each area and displays a green rectangle in places
and the camera obtains focus points of each area and displays a green rectangle in places
and the camera obtains focus points of each area and displays a green rectangle in places
where focus is set correctly. It is recommended for scenery photos.
where focus is set correctly. It is recommended for scenery photos.
where focus is set correctly. It is recommended for scenery photos.
Face detection
Use this option to select a face detection mode.
In expert mode, tap
• N ormal: Use this to measure exposure on a human face.
: Use this to measure exposure on a human face.
: Use this to measure exposure on a human face.
• S mile shot: Use this to recognise and helps taking people's smiling faces. (p. 77)
: Use this to recognise and helps taking people's smiling faces. (p. 77)
: Use this to recognise and helps taking people's smiling faces. (p. 77)
• B link detection: Use this to detect closed eyes and automatically takes additional photos.
: Use this to detect closed eyes and automatically takes additional photos.
: Use this to detect closed eyes and automatically takes additional photos.
(p. 78)
• W hen a face is detected, the camera tracks the face automatically.
When a face is detected, the camera tracks the face automatically.
When a face is detected, the camera tracks the face automatically.
• T his feature may not be effective in the following conditions:
This feature may not be effective in the following conditions:
This feature may not be effective in the following conditions:
– The subject is too far from the camera.
The subject is too far from the camera.
The subject is too far from the camera.
– The lighting is too bright or too dark.
– The subject is not facing the camera.
– The subject is wearing sunglasses or a mask.
– The subject's facial expression changes drastically.
– The subject is backlit, or the lighting conditions are unstable.
→
→ Focus area, and select an option.
→
→ Face detection, and select an option.
Face
Face detection
detection, and select an option.
, and select an option.
103
Advertisement
Table of Contents
