Table of Contents
Advertisement
Camera: Shooting options and settings
Flash
To take a realistic photo of a subject, the amount of light should be constant. When the light
source varies, you can use a flash and supply a constant amount of light.
(or →
) →
Tap
• O ff: Use this to turn the flash off.
• A uto: Use this to automatically use the flash. The flash fires when the subject or
background is dark.
• R ed-eye: Use this to prevent a red glow in the subject's eyes.
• F ill in: Use this to always use the flash.
• S low sync: Use this to keep details of the background.
• R ed-eye fix: Use this to correct a red glow in the subject's eyes.
: Use this to correct a red glow in the subject's eyes.
: Use this to correct a red glow in the subject's eyes.
• T here is an interval between two bursts of the flash. Do not move until the flash
There is an interval between two bursts of the flash. Do not move until the flash
There is an interval between two bursts of the flash. Do not move until the flash
fires a second time.
• I f light from the flash is reflected, or if a substantial amount of dust is in the air, tiny
If light from the flash is reflected, or if a substantial amount of dust is in the air, tiny
If light from the flash is reflected, or if a substantial amount of dust is in the air, tiny
spots may appear in the photo.
Focus mode
Use this option to select a focus mode appropriate to the subject.
Use this option to select a focus mode appropriate to the subject.
Use this option to select a focus mode appropriate to the subject.
In expert mode, tap
• A uto focus: Use this to capture a still subject. When you half-press the Shutter button, the
: Use this to capture a still subject. When you half-press the Shutter button, the
: Use this to capture a still subject. When you half-press the Shutter button, the
focus fixes in the focus area. The area turns green when the focus is achieved.
focus fixes in the focus area. The area turns green when the focus is achieved.
focus fixes in the focus area. The area turns green when the focus is achieved.
• M acro: Use this to capture very close objects.
→ Flash, and select an option.
→
→
→
→ Focus mode, and select an option.
Focus mode
Focus mode
102
Advertisement
Table of Contents
