Asus Q170M2 Manual page 76

Data Bits [7]
Allows you to select the data bits. Configuration options: [7] [8]
Parity [None]
A parity bit can be sent with the data bits to detect some transmission errors. This
item allows you to set the parity bit. Configuration options: [None] [Even] [Odd] [Mark]
[Space]
Stop Bits [1]
Stop bits indicate the end of a serial data packet. This item allows you to set the stop
bits. Configuration options: [1] [2]
Flow Control [None]
Flow control prevents data loss from buffer overflow. This item allows you to set the
flow control. Configuration options: [None] [Hardware RTS/CTS]
VT-UTF8 Combo Key Support [Off]
Allows you to enable or disable VT‑UTF8 Combo Key Support. Configuration options:
[On] [Off]
Recorder Mode [Off]
When set to [Off], only text will be sent. Configuration options: [On] [Off]
Resolution 100x31 [Off]
Allows you to enable or disable extended terminal resolution. Configuration options:
[On] [Off]
Legacy OS Redirection Resolution [80x24]
Allows you to set the redirection resolution on legacy OS. Configuration options:
[80x24] [80x25]
Putty KeyPad [VT100]
Allows you to select FunctionKey and Keypad on Putty. Configuration options: [VT100]
[LINUX] [XTERMR6] [SCO] [ESCN] [VT400]
Redirection After BIOS POST [Always Enable]
[Always Enable] Legacy console redirection is enabled for legacy OS.
[BootLoader]
Legacy Console Redirection Settings
Legacy Serial Redirection Port [COM0]
This item allows you to set the legacy serial redirection port. Configuration options:
[COM0] [COM1(Pci Bus0, Dev0, Func0) (Disabled)]
Console Redirection [Off]
Allows you to enable or disable the console redirection. Configuration options: [On] [Off].
The following items become configurable only when you set the previous item to [On].
Out-of-Band Mgmt Port [COM0]
Microsoft Windows Emergency Management Services (EMS) allows for remote
management of a Windows Server OS through a serial port. Configuration options:
[COM0] [COM1(Pci Bus0, Dev0, Func0) (Disabled)]
2‑36
Legacy console redirection is disabled before booting to Legacy OS.
Chapter 2: Getting started