Table of Contents
Advertisement
DMI/OPI Configuration
Allows you to control various DMI/OPI functions.
DMI Max Link Speed [Auto]
Allows you to set the DMI speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PEG Port Configuration
Allows you to configure the PEG Port settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIEX16_1 speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
PCIEX16_2 Link Speed [Auto]
Allows you to configure the PCIEX16_1 speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
Memory Configuration
Memory Remap [Enabled]
Allows you to enable or disable remapping the memory above 4GB. Configuration
options: [Disabled] [Enabled]
PCH Configuration
DeepSx Power Policies [Disabled]
Allows you to configure the DeepSx Mode. Configuration options: [Disabled] [Enabled in
S4‑S5]
PCI Express Configuration
PCIe Speed [Auto]
Allows you to configure the PCIe speed. Configuration options: [Auto] [Gen1] [Gen2]
PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
Hyper Kit Mode [Disabled]
Disables this option for M.2 devices. Enables this option for ASUS Hyper Kit card.
Configuration options: [Disabled] [Enabled]
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Configuration options: [Disabled] [Enabled]
The following items appear only when you set SATA Controller(s) to [Enabled].
ASUS Q170M2
2‑31
Advertisement
Table of Contents
