Onkyo HT-RC660(B) Service Manual page 17

OPERATION CHECK-6
CONFIRMATION OF VIDEO SIGNAL-DETECTION
1. Do the following operation.
1-1. set the volume level to 25(TX-NR636, DTR-30.6) or 30(TX-NR737, 838, DTR-40, 50.5).
1-2. [TV/CD] + [ON/STANDBY] → [PC]
1-3. [TONE +]
to the following test mode.
TEST 5-01
2. Confirm the following indicator lights up on the FL TUBE when the following video signal is input.
3. Furthermore, confirm the following indicator is turned off on the FL TUBE when the following video signal isn't input at the
following test mode as well.
Input terminal
Indicator
CONFIRMATION OF VIDEO IN/OUT
Confirm Video output signal as shown Table 2, while Video signal are input as shown Table 1 in "Video in_out" sheet.
<NOTE>Confirm the HDMI path at 1080p signal.
Table-1
Video Signal ->
Table-2
Output
Test mode
5-00(BD/DVD)
5-01(CBL/SAT)
5-02(STB/DVR)
5-03(GAME)
5-04(PC)
5-05(IN6)
5-06(IN7)
5-07(AUX)
5-08(CBL/SAT)
5-09(CBL/SAT)
CONFIRMATION OF FL DISPLAY
1. Do the following operation.
1-1. set the volume level to 25(TX-NR636, DTR-30.6) or 30(TX-NR737, 838, DTR-40, 50.5).
1-2. [TV/CD] + [ON/STANDBY] → [DIMMER(RT/PTY/TP)]
to the FL test mode
[TONE+] = Step up
[TONE-] = Step down
TX-NR636/ 737/ 838/ HT-RC660/ HT-R993/ DTR-30.6/ 40.6/ 50.6
(1)
Composite
FM STEREO
Composite Video Component
BD/DVD --- ---
CBL/SAT A IN1
STB/DVR B ---
GAME C ---
--- --- ---
--- --- ---
--- --- ---
AUX D ---
Composite Video Component
MONITOR OUT OUT
--- ---
A
B ---
C ---
--- ---
--- ---
--- ---
D ---
A E
A ---
(2)
Component
RDS
HDMI
--- IN1 F
E IN2 G
--- IN3 H
--- IN4 I
--- IN5 J
--- IN6 K
--- IN7 ---
--- AUX L
HDMI
MAIN OUT *Sub OUT/Zone2 OUT
F
E G
H
I
J
K
---
L
E
A
* TX-NR636, TX-NR737, DTR-30.6 --- Sub OUT
TX-NR838, DTR-40.6, DTR-50.6 --- Zone2 OUT