Dahua F4X5 Operation Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. Security Camera
  5. F4X5
  6. Operation manual
Dahua F4X5 Operation Manual

Dahua F4X5 Operation Manual

Network speed dome web3.0 o
Hide thumbs Also See for F4X5:
Table of Contents

Advertisement

Quick Links

Download this manual
Dahua Network Speed Dome Web3.0 Operation Manual
Dahua Network Speed Dome Web3.0 Operation Manual
Version 1.0.0
Dahua Technology CO., LTD
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F4X5 and is the answer not in the manual?

Questions and answers

Related Manuals for Dahua F4X5

Summary of Contents for Dahua F4X5

  • Page 1 Dahua Network Speed Dome Web3.0 Operation Manual Dahua Network Speed Dome Web3.0 Operation Manual Version 1.0.0 Dahua Technology CO., LTD...

  • Page 2: Table Of Contents

    Dahua Network Speed Dome Web3.0 Operation Manual Table of Contents Network Config ..........................1 Network Connection ..................... 1 Log in ..........................1 Live ..............................5 Encode Setup ........................ 5 System Menu ......................... 6 Video Window Function Option .................. 6 Video Window Setup ....................7 2.4.1 Image Adjustment .....................
  • Page 3 Dahua Network Speed Dome Web3.0 Operation Manual 4.2.1 TCP/IP ........................34 4.2.2 ONVIF ........................36 4.2.3 Connection ......................37 4.2.4 PPPoE ........................39 4.2.5 DDNS ........................40 4.2.6 IP filter ........................42 4.2.7 SMTP （e-mail) ..................... 42 4.2.8 UPnP ........................44 4.2.9 SNMP ........................
  • Page 4 Dahua Network Speed Dome Web3.0 Operation Manual Important The following functions are for reference only. Some series products may not support all the functions listed below.

  • Page 5: Network Config

    Dahua Network Speed Dome Web3.0 Operation Manual 1 Network Config 1.1 Network Connection Speed dome and PC connection mainly has two ways. See Figure 1-1 and Figure 1-2. Figure 1-1 Figure 1-2 Before you access speed dome via the Internet, you need to have its IP address. You can use quick config tool to search IP of the speed dome.
  • Page 6 Dahua Network Speed Dome Web3.0 Operation Manual Input your IP address here Figure 1-3 The login interface is shown as below. See Figure 1-4. Please input your user name and password. Default factory username is admin and password is admin.
  • Page 7 Dahua Network Speed Dome Web3.0 Operation Manual Figure 1-5 If it is your first time to login in, you may see the interface shown as in Figure 1-5 Click “Please click here to download and install the plug-in”. The system pops up warning information to ask you whether run or save this plug-in.
  • Page 8 Dahua Network Speed Dome Web3.0 Operation Manual Figure 1-6 Click install, you will see Figure 1-7. Figure 1-7 When plug-in installation is complete, the installation page closes automatically. The web-end will refresh automatically, and then you can view video captured by the camera.

  • Page 9: Live

    Dahua Network Speed Dome Web3.0 Operation Manual 2 Live After you logged in, you can see the live monitor window. See Figure 2-1. Figure 2-1 There are four sections:  Section 1: Encode setup bar  Section 2: System menu ...

  • Page 10: System Menu

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 2-2 Please refer to the following sheet for detailed information. Parameter Function Streaming media protocol connection, under main stream config, Main stream monitor video or not. Generally for storage and monitor. Streaming media protocol connection, under sub stream 1 Sub (Extra) config, monitor video or not.

  • Page 11: Video Window Setup

    Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function Click the button and use mouse to select an area in the box Regional on the video screen, which will make the device auto focus in Focus the selected box area.

  • Page 12: Original Size

    Dahua Network Speed Dome Web3.0 Operation Manual to WEB end only. It is to adjust monitor video  Please go to Setup- contrastness. >Camera->Conditions to adjust corresponding items. It is to adjust monitor video hue. It is to adjust monitor video saturation.

  • Page 13: Ptz

    Dahua Network Speed Dome Web3.0 Operation Manual 2.4.7 PTZ Click it to open PTZ setup interface. Please refer to chapter 2.5 for detailed setup information. 2.5 PTZ Configuration 2.5.1 PTZ Control Before PTZ operation, please make sure you have properly set PTZ protocol.

  • Page 14: Ptz Function

    Dahua Network Speed Dome Web3.0 Operation Manual The virtual joystick interface is shown as below. See Figure 2-8. This function allows you to control the button in then center to simulate the joystick operation. You can use it to control device movement.
  • Page 15 Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function  Select Scan from the dropdown list, click Start button, you can Scan begin scan operation. Default SN is 1.  Input the preset value and then click View button, the camera Preset turns to the corresponding position of the preset.

  • Page 16: Playback

    Dahua Network Speed Dome Web3.0 Operation Manual 3 Playback Web client playback supports video playback and picture playback. Note: Before playback, user shall set storage management as in Chapter 4.5. 3.1 Playback The playback interface is shown as in Figure 3-1.

  • Page 17: Function Of Play

    Dahua Network Speed Dome Web3.0 Operation Manual 3.1.1 Function of Play Figure 3-2 The function of play is shown as in Figure 3-2 Parameter Function When you see this button, it means pause or not played record. Click this button, ①...
  • Page 18 Dahua Network Speed Dome Web3.0 Operation Manual Figure 3-3 Parameter Function Select “dav”, as video playback.  File Type Select “jpg” as picture playback.  Data Source Default is SD card. Step 1. Click data in blue, time axis displays record file progress bar in color. While, green represents normal record, yellow represents motion detect record, red represents alarm record, and blue represents manual record.
  • Page 19 Dahua Network Speed Dome Web3.0 Operation Manual Figure 3-5 Parameter Function It means records within searched start time and end time on the date. Search Record Download There are two formats: dav, mp4. Format Record type is “dav”, click download button to download file to local.

  • Page 20: Playback Cut (Clip)

    Dahua Network Speed Dome Web3.0 Operation Manual 3.1.3 Playback Cut (Clip) Note: Playback cut function will automatically pause playing record as playback cut and playback cannot be at the same time. Step 1. Click start time to cut on time axis. This time must be within progress bar range.

  • Page 21: Assistant Function

    Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function Click it, means video in past 24 hours. 24 hours Click it, means video in past 2 hours. 2 hours Click it, means video in past 1 hour. 1 hour Click it, means video in past 30 min.

  • Page 22: Play

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 3-10 3.2.1 Play The play button is shown as below. See Figure 3-11. Figure 3-11 Default icon is , and it means pause or not played picture.  Click play button to switch to normal play status. Icon becomes ...

  • Page 23: Snapshot Type

    Dahua Network Speed Dome Web3.0 Operation Manual Step 2: Double click file in list to play this snapshot. Figure 3-12 Figure 3-13 Please refer to the following sheet for detailed information. Parameter Function It means all snapshot files within the start time and end time of selected date.

  • Page 24: Setup

    Dahua Network Speed Dome Web3.0 Operation Manual 4 Setup Web client setup support camera, network, PTZ, event, storage, system and system info view. 4.1 Camera 4.1.1 Conditions Here you can view device property information. Slight differences may be found due to different speed dome series.
  • Page 25 Dahua Network Speed Dome Web3.0 Operation Manual Zoom& Focus It is to set camera zoom and focus mode. It is to set digital zoom/camera zoom rate. Focus mode includes: auto/manual/semi auto. It is to set camera video. It includes: Picture...
  • Page 26 Dahua Network Speed Dome Web3.0 Operation Manual 4.1.1.2 Exposure Exposure interface is shown as below. See Figure 4-3. Figure 4-3 Please refer to the following sheet for detailed information. Parameter Function  It is to set camera exposure mode. It includes: auto and Exposure mode manual.
  • Page 27 Dahua Network Speed Dome Web3.0 Operation Manual If the light may change greatly, you can use slow exposure to Slow exposure get image so that the camera can get stable video. It is to set camera max gain. Max Auto gain...
  • Page 28 Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function For the environments of strong contrast effect, it can auto WDR Mode adjust image contrast so that you can see the dark and bright section at the same time. When there is strong light source in the environment, system can auto adjust video brightness to remove the over exposure effect.
  • Page 29 Dahua Network Speed Dome Web3.0 Operation Manual 4.1.1.5 Zoom &Focus The zoom &focus interface is shown as in Figure 4-6. Figure 4-6 Please refer to the following sheet for detailed information. Parameter Function Digital zoom Check the box here to enable digital zoom function.
  • Page 30 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-7 Please refer to the following sheet for detailed information. Parameter Function Style It is to set video style. It includes：Standard/soft/ flamboyant. It is to set picture hue. It is to set video brightness. The higher is value is, the bright Brightness the video is.
  • Page 31 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-8 Parameter Note Mode It is to set the camera defog mode, it includes: off and auto. 4.1.1.8 Default Default interface is shown as in Figure 4-8.

  • Page 32: Video

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-8 Please refer to the following sheet for detailed information. Parameter Function It is to restore camera parameter to factory default setup. Default 4.1.1.9 Profile Management Profile management interface is shown as in Figure 4-9.
  • Page 33 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-10 Please refer to the following sheet for detailed information. Parameter Function Please check the box here to enable extra stream Sub Stream Enable function. This function is enabled by default. ACF means using different fps to record.
  • Page 34 Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function Recommended Bit Recommended bit rate value according to the resolution and frame rate you have set.  In CBR, the bit rate here is the max value. In Bit Rate dynamic video, system needs to low frame rate or video quality to guarantee the value.
  • Page 35 Dahua Network Speed Dome Web3.0 Operation Manual 4.1.2.3 Video Overlay The video overlay interface is shown as in Figure 4-12 to Figure 4-16. Figure 4-12 Figure 4-13...
  • Page 36 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-14 Figure 4-15...
  • Page 37 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-16 Please refer to the following sheet for detailed information. Parameter Function  Select “privacy mask zone”, click “draw”, drag mouse on Privacy Masking the video monitoring window and draw the corresponding privacy shielded zone of “privacy mask zone”.

  • Page 38: Network

    Dahua Network Speed Dome Web3.0 Operation Manual  You can enable this function to display overlay picture. Picture Overlay Click disable to turn it off. See Figure 4-.  Click Upload Picture to overlay local picture into monitoring window. You can drag the yellow box to move it.
  • Page 39 Dahua Network Speed Dome Web3.0 Operation Manual The TCP/IP interface is shown as in Figure 4-18. It supports IPv4 and IPv6. IPv4 supports static IP and DHCP. IPv6 supports static IP only. When you manually modify IP address, WEB will automatically jump to the new IP address.

  • Page 40: Onvif

    Dahua Network Speed Dome Web3.0 Operation Manual IP Address Please use the keyboard to input the corresponding number to modify the IP address and then set the corresponding subnet mask and the default gateway. Preferred DNS DNS IP address. Alternate DNS Alternate DNS IP address.

  • Page 41: Connection

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-19 4.2.3 Connection 4.2.3.1 Connection The connection interface is shown as in Figure 4-20. Figure 4-20 Please refer to the following sheet for detailed information.
  • Page 42 Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function It is the max Web connection for the same device. The value ranges from 1 connection to 20. Default connection amount is 10. TCP port Port range is 1025~65534. The default value is 37777. You can input the actual port number if necessary.

  • Page 43: Pppoe

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-21 Please refer to the following sheet for detailed information. Parameter Function Authentication The login authentication is off by default. 4.2.4 PPPoE The PPPoE interface is shown as in Figure 4-22. Input the PPPoE user name and password you get from the IPS (internet service provider) and enable PPPoE function.

  • Page 44: Ddns

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-22 4.2.5 DDNS The DDNS interface is shown as in Figure 4-23. The DDNS is to set to connect the various servers so that you can access the system via the server.
  • Page 45 Please refer to the following sheet for detailed information. Parameter Function Server Type You can select DDNS protocol from the dropdown list and then enable DDNS function. The Dahua DDNS means you use your self-defined private protocol to realize DDNS function.

  • Page 46: Ip Filter

    Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function Server Address DDNS server IP address. Under DDNS the default server address is www.Dahuaddns.com Mode The default is auto, and you can select manual. Auto and self-defined domain names are both MAC address.quickddns.com. You Domain Name can self-define prefix.
  • Page 47 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-26 Please refer to the following sheet for detailed information. Parameter Function Input server address and then enable this function. SMTP Server Port Default value is 25. You can modify it if necessary.

  • Page 48: Upnp

    Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function The send interval ranges from 0 to 3600 seconds. 0 means Interval there is no interval. Please note system will not send out the email immediately when the alarm occurs. When the alarm, motion detection or the abnormity event activates the email, system sends out the email according to the interval you specified here.

  • Page 49: Snmp

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-27 4.2.9 SNMP The SNMP interface is shown as in Figure 4-28. The SNMP allows the communication between the network management work station software and the proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or establish the SNMP service before you use this function.
  • Page 50 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-28 Please refer to the following sheet for detailed information. Parameter Function  SNMP Version Check SNMP v1, device only process v1 info.  Check SNMP v2, device only process v2 info.

  • Page 51: Bonjour

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-29 Please refer to the following sheet for detailed information. Parameter Function SNMP Version SNMP v3 Default is public. Read-only Note: Username Name only can be number, letter and underline. Default is private.

  • Page 52: Multicast

    Dahua Network Speed Dome Web3.0 Operation Manual Bonjour is based on the multicast DNS service from the Apple. The Bonjour device can automatically broadcast its service information and listen to the service information from other device. You can use the browse of the Bonjour service in the same LAN to search the speed dome device and then access if you do not know the speed dome information such as IP address.

  • Page 53: 802.1X

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-31 Please refer to the following sheet for detailed information. Parameter Function Select to enable multicast function. Main stream and sub stream cannot be Enable used at the same time. Main/sub stream multicast default address is 224.1.2.4 and its range is Multicast address 224.0.0.0～239.255.255.255.

  • Page 54: Qos

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-32 Please refer to the following sheet for detailed information. Parameter Function Authentication PEAP (protected EAP protocol). It needs the username to login, which is authenticated by the Username server. Password Please input password here.

  • Page 55: Ptz

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-33 Please refer to the following sheet for detailed information. Parameter Function Real-time The value ranges from 0 to 63. The router or the switcher can monitor provide different service for various data packets.
  • Page 56 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-34 In this part, you can operate the PTZ of the camera and control PTZ movement. Parameter Function Preset Set camera preset. Tour Set camera tour. Max 8 tours. Scan Set camera scan.
  • Page 57 Dahua Network Speed Dome Web3.0 Operation Manual 4.3.1.1 Preset Preset interface is shown as in Figure 4-35. Figure 4-35 Please refer to the following sheet for detailed information. Parameter Function Preset No. Set preset No. It becomes valid after you set.
  • Page 58 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-36 Please refer to the following sheet for detailed information. Parameter Function Tour No. System auto allocates. Tour title Set tour name. You can input self-defined tour name here. Begin tour. Start Please note this function is null if you have not set a tour.
  • Page 59 Dahua Network Speed Dome Web3.0 Operation Manual 4.3.1.3 Scan Scan interface is shown as below. See Figure 4-37. Figure 4-37 Please refer to the following sheet for detailed information. Parameter Function Scan No. System auto allocates. Set scan speed here.
  • Page 60 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-38 Please refer to the following sheet for detailed information. Parameter Function Pattern No. System auto allocates. Begin pattern. Start Please note this function is null if you have not set a pattern.
  • Page 61 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-39 Please refer to the following sheet for detailed information. Parameter Function PTZ speed Here you can set camera PTZ speed. 4.3.1.6 Idle Motion Idle motion interface is shown as below. See Figure 4-40.
  • Page 62 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-40 Please refer to the following sheet for detailed information. Parameter Function Enable Check the box here to enable idle motion function. Here you can set preset, scan, pattern, tour. Idle Motion Please note you need to set the corresponding operation first if you want to use this function.
  • Page 63 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-41 Please refer to the following sheet for detailed information. Parameter Function Enable Check the box here to enable power up function. Here you can set preset, scan, pattern, tour and auto.
  • Page 64 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-42 Figure 4-43...
  • Page 65 Dahua Network Speed Dome Web3.0 Operation Manual Parameter Note Enable It is to enable time task function. Task Action It is to set the time task action, such as preset, tour, scan and pattern. When call PTZ artificially and interrupt time task, it can auto restore the time Auto Home that time task needs.

  • Page 66: Event

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-45 Please refer to the following sheet for detailed information. Parameter Function Default Restore PTZ factory default setup. 4.4 Event 4.4.1 Video detect 4.4.1.1 Motion Detect The motion detect interface is shown as in Figure 4-46 through Figure 4-49.
  • Page 67 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-46 Figure 4-47...
  • Page 68 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-48...
  • Page 69 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-49 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable motion detection function. Here you can set arm/disarm period. Click set button to open Working Period period setup menu.

  • Page 70: Ivs Analysis

    Dahua Network Speed Dome Web3.0 Operation Manual Area threshold It is to check target object area related to detection area. The lower the area threshold, the easier to trigger motion detection. You can set up to four areas. The range is 0~100. The recommenced value is 0~10.
  • Page 71 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-51 Figure 4-52...
  • Page 72 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-53 Figure 4-54 Parameter Note Enable Check it to enable IVS analysis alarm.

  • Page 73: Face Detect

    Dahua Network Speed Dome Web3.0 Operation Manual Parameter Note  This function becomes activated in the specified periods.  There are six periods in one day. Please draw a circle to enable corresponding period.  Working Select date. If you do not select, current setup applies to today only. You can Period select all week column to apply to the whole week.
  • Page 74 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-55 Figure 4-56...

  • Page 75: Abnormality

    Dahua Network Speed Dome Web3.0 Operation Manual Parameter Note Enable Face Check it to enable face detect alarm. Detect  This function becomes activated in the specified periods.  There are six periods in one day. Please draw a circle to enable corresponding period.
  • Page 76 Dahua Network Speed Dome Web3.0 Operation Manual Device without SD card function does not have the above three statuses. Figure 4-57 Figure 4-58 Figure 4-59 Please refer to the following sheet for detailed information.
  • Page 77 Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function There are three kinds of events for SD card abnormality alarm: No SD Event card, Capacity Warning, SD card error. Type Check to alarm when SD card is abnormal. Enable Send...

  • Page 78: Storage Management

    Dahua Network Speed Dome Web3.0 Operation Manual When login password keep been wrong for a few times, unauthorized access alarm occurs. This operation is similar to SD card error. Allow login error times as when it exceeds this limit, user account will be locked.
  • Page 79 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-63 Step 2. From Monday to Sunday select record time, click setup on the right. See Figure 4-64.  Set period according to actual need. There are six periods available each day.
  • Page 80 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-65 Step 4. In record schedule interface, click OK. System prompts it is successfully saved. 4.5.1.2 Snapshot Schedule Snapshot setup as: Step 1. Click Snapshot Schedule tab, see Figure 4-66. Figure 4-66 Step 2.
  • Page 81 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-67 Step 3. Click OK, return to snapshot schedule interface. See Figure 4-68.  Green color stands for the general record/snapshot.  Yellow color stands for the motion detect record/snapshot.  Red color stands for the alarm record/snapshot.

  • Page 82: Destination

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-69 Step 2. Select date to set as holiday. The selected date will be highlighted in yellow. Step 3. Check Record/Snapshot, click Save. System prompts it is successfully saved. Step 4. Check Record Schedule/Snapshot Schedule interface, click setup next to Holiday, refer to setup of Monday to Sunday.
  • Page 83 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-70 Please refer to the following sheet for detailed information. Parameter Function Event It includes: scheduled, motion detect and alarm. Type Local It saved in the SD card. It saved in the FTP server.

  • Page 84: Record Control

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-72 4.5.2.4 NAS You need to check the box to enable the NAS function. Select NAS storage as to same file to NAS disk. See Figure 4-73. Figure 4-73 4.5.3 Record control...

  • Page 85: System

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-74 Please refer to the following sheet for detailed information. Parameter Function Here you can select file size within 1min~120min. Default setup is 8 Pack minutes. Duration Pre-record Please input pre-record value here.
  • Page 86 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-75 Please refer to the following sheet for detailed information. Parameter Function It is to set device name. Device Name Video This is to display video standard such as PAL. Standard Language You can select the language from the dropdown list.

  • Page 87: Account

    Dahua Network Speed Dome Web3.0 Operation Manual Here you can set day night save time begin time and end time. You can set according to the date format or according to the week format. You can check the box to enable NTP function.
  • Page 88 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-77 Enable anonymity login: Enable anonymity login, and input IP. No username or password is required, you can log in by anonymity (with limited rights). You can click logout to end your session.
  • Page 89 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-78 Modify user It is to modify the user property, belonging group, password and rights. See Figure 4-79. Modify password It is to modify the user password. You need to input the old password and then input the new password twice to confirm the new setup.
  • Page 90 Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-79 4.6.2.2 Group The group management interface can add/remove group, modify group password and etc. The interface is shown as in Figure 4-80. Figure 4-80 Add group: It is to add group and set its corresponding rights. See Figure 4-81.

  • Page 91: Default

    Dahua Network Speed Dome Web3.0 Operation Manual Please input the group name and then check the box to select the corresponding rights. It includes: preview, playback, record control, PTZ control and etc. Figure 4-81 Modify group Click the modify group button, you can see an interface is shown as in Figure 4-82.

  • Page 92: Import/Export

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-83 4.6.4 Import/Export The interface is shown as in Figure 4-84. Figure 4-84 Please refer to the following sheet for detailed information. Parameter Function It is to import the local setup files to the system.

  • Page 93: Upgrade

    Dahua Network Speed Dome Web3.0 Operation Manual Figure 4-85 Parameter Function Auto Reboot Check it and set auto reboot time. Auto Delete Old Check it and set period within 1~31 days. Files 4.6.6 Upgrade The upgrade interface is shown as in Figure 4-86.

  • Page 94: Information

    Dahua Network Speed Dome Web3.0 Operation Manual 4.7 Information 4.7.1 Version The version interface is shown as in Figure 4-87. Here you can view system hardware features, software version, release date and etc. Please note the following information is for reference only.

  • Page 95: Online User

    Dahua Network Speed Dome Web3.0 Operation Manual Parameter Function Set the start time of the requested log. (The earliest time is 2000/1/1) Start time Set the end time of the requested log. (The latest time is 2037/12/31) End time Log type.

  • Page 96: Alarm

    Dahua Network Speed Dome Web3.0 Operation Manual 5 Alarm Please note some series product does not support this function. Click alarm function, you can see an interface is shown as in Figure 5-1. Here you can set device alarm type and alarm sound setup.
  • Page 97 Dahua Network Speed Dome Web3.0 Operation Manual Type Parameter Function Path Here you can specify alarm sound file.

  • Page 98: Log Out

    Dahua Network Speed Dome Web3.0 Operation Manual 6 Log out Click log out button, system goes back to log in interface. See Figure 6-1. Figure 6-1 Note:  This manual is for reference only. Slight difference may be found in user interface.

Table of Contents