Uncoupling In The Conventional Environment; Uncoupling Your Locomotive In The Conventional Environment - Lionel GP30 Owner's Manual

Conventional transformer operations

Uncoupling your locomotive in the conventional environment

Y our locomotive features two ElectroCouplers that are released by remote control at any
point around your layout in the TrainMaster Command Control environment.
In the conventional environment, the ElectroCouplers will not open manually or by using a
Remote-Control Track section. To couple your locomotive in the conventional environment, you
must rely on a piece of rolling stock equipped with a magnetic coupler. Simply release the
magnetic coupler and couple the rolling stock to the locomotive, even if the ElectroCoupler is
closed.
Keep in mind that you may still make use of Lionel Remote-Control Track sections (6-65530
for O gauge; 6-12746 and 6-65149 for O-27 gauge; and 6-12020 for FasTrack layouts) with the
magnetic couplers on the rolling stock. Place the trigger disc on the magnetic coupler over the
central coil on the Remote-Control Track section, then press UNCOUPLE on the track section's
controller. As illustrated in Figure 2, the magnetic field pulls the disc downward, releasing the
coupler.
Figure 2. Magnetic coupler operation
8
Remote-Control
Track Section