Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Europlex 3806ZL
Summary of Contents for Europlex 3806ZL
- Page 2 OPERATING INSTRUCTIONS FOR MODEL 3806ZL SUITE UNIT TO ARM (TURN ON) YOUR SYSTEM 1. Check the red window above the arming buttons to see that all LEDs are off This indicates that all protection points are normal. If any LED is lit, this...
- Page 3 TO DISARM (TURN OFF) YOUR SYSTEM 1. When you enter your suite, the beeper will start sounding. This is to remind you to disarm your system. 2. Enter your four digit user code. Press each number button firmly until you hear a beep. As before in arming, you may use the backspace button (*) to permit re-entering the code.
- Page 4 It is not necessary to enter your user code to use these buttons. To activate any of these buttons, firmly press and hold the button for about three seconds. The beeper will sound a distinctive pattern for each of the buttons and then the ARMED/ALARM LED will start flashing.
- Page 5 allows you to remain in your suite SLEEP ARM with part of the protection turned on. The entry/exit door is on but interior motion sensors (if any) are not on. Opening the door will cause an immediate intrusion alarm. You must disarm the suite unit to stop the beeper.
- Page 6 To bypass a zone, firmly press and release the FUNCTION button and then the number 3 button. The BYPASS LED (lower right front) on the suite unit will be blinking. Firmly press the number of the zone to be bypassed (1-4) and the blinking led will be on steady.
- Page 7 'default' setting and must be given new codes. Check with the property management office or building security as to the policy for submitting your codes to them or receiving your codes from them. The programming of the codes into the system must be done by management/security and may require you to prepare a list noting the user number followed by a four digit code.
- Page 8 EMERGENCY NUMBERS POLICE: FIRE DEPT: AMBULANCE: DOCTOR: HOSPITAL: OTHER:...
Need help?
Do you have a question about the 3806ZL and is the answer not in the manual?
Questions and answers