Starting The Engine - Toro 22179TE Operator's Manual

When fueling, under certain circumstances, a
static charge can develop, igniting the gasoline.
A fire or explosion from gasoline can burn you
and others and damage property.
• Always place gasoline containers on the
ground and away from your vehicle before
filling.
• Do not fill gasoline containers inside a
vehicle or on a truck or trailer bed because
interior carpets or plastic truck bed liners
may insulate the container and slow the loss
of any static charge.
• When practical, remove gasoline-powered
equipment from the truck or trailer and
refuel the equipment with its wheels on the
round.
• If this is not possible, then refuel such
equipment on a truck or trailer from a
portable container, not from a gasoline
dispenser nozzle.
• If you must use a gasoline dispenser nozzle,
keep the nozzle in contact with the rim of
the fuel tank or container opening at all
times until fueling is complete.
Use a fuel stabilizer/conditioner regularly during
operation and storage. A stabilizer/conditioner cleans
the engine during operation and prevents gum-like
varnish deposits from forming in the engine during
periods of storage.
Important: Do not use fuel additives other than
a fuel stabilizer/conditioner. Do not use fuel
stabilizers with an alcohol base such as ethanol,
methanol, or isopropanol.
1. Clean around the fuel tank cap (Figure 12).
1. Oil fill/dipstick
2. Fuel tank cap
2. Remove the cap from the tank.
3. Fill the fuel tank with unleaded gasoline to within
1/4 to 1/2 inch (6 to 13 mm) from the top of the
tank. Do not fill into the filler neck.
Important: Do not fill the tank more than 1/4
inch (6 mm) from the top of the tank because
the gasoline must have room to expand.
4. Install the fuel tank cap and wipe up any spilled
gasoline.

Starting the Engine

1. Connect the wire to the spark plug (Figure 13).
1. Spark-plug wire
2. Open the fuel valve (Figure 14)
12
Figure 12
3. Air cleaner
Figure 13