Side-Discharging The Clippings - Toro 20380 Operator's Manual

Super recycler
Table of Contents

Advertisement

1. Lever
Note: To unlock the plug, rotate the lever on the plug to the
right (Figure 17).

Side-discharging the Clippings

Use the side-discharge for cutting very tall grass.
Important: Ensure that the rear-discharge plug is
locked in place. To lock the plug: Raise the discharge
deflector (Figure 18), firmly push the plug in until it
snaps into place behind the tabs, and rotate the lever on
the plug to the left (Figure 17).
Figure 17
2. Tabs
1. Discharge deflector
Note: To unlock the plug, rotate the lever on the plug to the
right (Figure 17).
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Installing the Side-discharge Chute
1. Unlock the side-discharge door (Figure 19).
2. Lift open the side-discharge door (Figure 20).
3. Install the side-discharge chute and close the door onto
the chute (Figure 21).
11
G017463
Figure 18
2. Rear-discharge plug
Figure 19
Figure 20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents